10 Ways to Prepare Your Vehicle for Fall in Utah

1. Check all fluids, including engine oil, power steering, brake and transmission as well as windshield washer solvent and antifreeze/coolant.
2. Check the hoses and beltsto make sure they are not cracked, brittle, frayed, loose or showing signs of excessive wear.
3. Check the battery and replace if necessary. Make sure the connection is clean, tight and corrosion-free.
4. Check the brake systemannually and have the brake linings, rotors and drums inspected at each oil change.
5. Inspect the exhaust systemfor leaks, damage and broken supports or hangers if there is an unusual noise. Exhaust leaks can be dangerous and must be corrected without delay.
6. Check the engineto make sure it is delivering the best balance of power and fuel economy and producing the lowest level of emissions.
7. Check the heating system as proper heating and cooling performance is critical for interior comfort and safety reasons, such as defrosting.
8. Inspect the steering and suspension system annually, including shock absorbers, struts and chassis parts such as ball joints, tie rod ends and other related components.
9. Check the tires, including tire pressure and tread. Uneven wear indicates a need for wheel alignment. Tires should also be checked for bulges and bald spots.
10. Check the wipers and lighting so that you can see and be seen. Check that all interior and exterior lighting is working properly and replace worn wiper blades so you can see clearly when driving during precipitation.

If you need more information on transmission service in Salt Lake or Salt Lake transmission repair, please visit www.jandgtransmissions.com or call J and G Transmissions at  801-262-2321.